Filter Adhesives

Structural Adhesives Ltd have a variety of filter adhesives for the filter industry.  We have developed high performance epoxy adhesives which will hold filtration systems together or for sealing endcaps as well as bonding the filter media onto a frame.  For all your bonding requirements for the filter industry, come and talk to the experts.

Products

• 

  S - 589/80A Structural Toughened Acrylic Adhesive - Good For Dissimilar Surfaces

  Two part premixed toughened acrylic adhesive for bonding dissimilar surfaces aslo has...
• 

  S-1008E Structural Single Part Epoxy Void Filler

  A single part, heat cured epoxy void filler.
• 

  S-106E Structural Heat Cured Toughened Epoxy Adhesive- Classic

  A single part, heat cured, toughened epoxy adhesive.
• 

  S-157E Structural Heat Cured Toughened Epoxy Adhesive - Reduced Cure Temperature

  A single part, heat cured, epoxy adhesive. It contains an in-built rubber-toughening...
• 

  S-171E Silver - Structural Mock Solder - Single Part

  A single part mock solder, which flows like solder and gives the apperance of...
• 

  S-171E Structural Heat Cured Toughened Epoxy Adhesive - Aluminum Filled High Impact Resistant

  Aluminium filled single part toughened epoxy adhesive.
• 

  S-2030E Structural Very Fast Cure Epoxy Adhesive

  A two part epoxy adhesive with very fast cure time. It reacts in a few minutes to give...
• 

  S-2052E Structural Slow Cure Epoxy Adhesive

  A two part epoxy adhesive with long open time. Bonds a wide variety of metals and...
• 

  S-206E Structural Two Part Toughened Epoxy Adhesive - Long Cure Time

  A two part toughened epoxy with long cure time. It is in paste form, it is...
• 

  S-2088E Structural Two Part Heat and Chemical Resistant Epoxy Sealant

  Two part heat and chemical resistant epoxy. Its particular feature is it resists...
• 

  S-2249E Structural Filter Assembly Epoxy Adhesive

  A two part epoxy adhesive/sealant with good heat resistance.

• S-2451E Structural Slow Cure Epoxy Adhesive with Lower Viscosity

  A two part epoxy adhesive with a long open time. A good general purpose adhesive...

• S-251E Structural Low Density Void/Acoustic filler

   A two part, cold curing epoxy adhesive designed to provide sound deadening...
• 

  S-2673E Structural Epoxy Potting Compound - Short Cure Cycle

  A two part epoxy potting compound for use in electrical potting and encapsulation.

• S-2725E Structural Epoxy Chemical and Heat Resistant End Cap Moulding Compound

  A very high temperature resistant toughened epoxy. It is designed to seal oil filters.
• 

  S-500/01A Structural Toughened Acrylic Adhesive - Classic

  A toughened reactive two part methacrylate based adhesive.
• 

  S-560/60A Structural Toughened Acrylic Adhesive - Good Gap Fill

  Two part premix toughened reactive methacrylate adhesive with good gap fill.
• 

  S-585/85A Structural Toughened Acrylic Adhesive - Pink and Green

  A premix two part methacrylate toughened adhesive with low viscosity and short open time.
• 

  S-590/80A Structural Toughened Acrylic Adhesive - Good Gap Fill

  A premixed toughened methacrylate adhesive with good gap fill designed to bond...