Products

Adhesives for Cut and Bond Bricks

S-2357E

DESCRIPTION
S - 2357 E is a two-part, cold curing epoxy adhesive. It is soft (highly thixotropic) and so is gunnable from twin cartridges. S - 2357 E can be used to bond damp surfaces.

APPLICATION
S - 2357 E may be used to bond or seal clayware and brick joints.

INSTRUCTIONS
Reference should be made to the Material Safety Data Sheet. The surfaces to be bonded should be clean and free from dust. Fit the twin cartridge into a suitable dispensing gun. If the material is to be dispensed without a static mixer then it must be mixed thoroughly by hand. Preferably fit, to the twin cartridge, a static mixer with a number of mixing elements sufficient to ensure that the adhesive emerges thoroughly mixed. This is indicated by the originally brown and beige parts emerging an even colour, without streaks. The mixed adhesive is applied to one surface, the other surface is offered up and the two pieces kept in position until cure is substantially complete. Should there be a process requirement to move the bonded item before 24hrs then the integrity of the bond should be tested for in a close simulation.

S-288E

S-288E is a two-part, cold curing adhesive designed to bond special bricks. S-288E combines a long pot-life with a rapid cure enabling bonds to be handled next day. S-288E is offered in its natural colour and in pigmented master colours - red, buff and blue - for the user to tint as required.

S-288E cures to a matt finished surface.

APPLICATION
S-288E is primarily designed to bond the cut surfaces of building bricks. S-288E will also bond other materials e.g. building blocks and steel.

INSTRUCTIONS
Reference should be made to the Material Safety Data Sheet.
S-288E is mixed in equal parts by weight. The surfaces to be bonded should be free from dust and grease and dry. The mixed adhesive is trowelled onto one face, the other face is offered up and the two pieces are kept in position until cure is substantially complete.

S-2511E

S-2511E is a two-part, cold curing adhesive designed to bond special bricks. It has a very rapid cure enabling bonds to be handled in 3 – 4 hours. It is offered in its natural beige colour and in at least twelve colours matched to the customers’ brick. It cures to a matt finish surface.

APPLICATION
S-2511 E is primarily designed to bond the cut surfaces of building bricks. It will also bond other materials, e.g. building blocks and steel.

INSTRUCTIONS
Reference should be made to the Material Safety Data Sheet before use. S–2511 E should be thoroughly mixed in equal parts by weight. The surfaces to be bonded should be free from dust and grease and dry. The mixed adhesive is trowelled onto one face, the other face is offered up and the two pieces are kept in position until cure is substantially complete.

S-2300E

S–2300E is primarily designed to make "cut and bond" special bricks. S–2300E will also bond other materials, e.g. building blocks, steel and concrete .It can be used to bond damp facing bricks

FREEZE/THAW TEST
Bricks bonded using this material has been tested by an independent laboratory in accordance with section 5.2 of BS 3921:1985. The bonds withstood 100 cycles without any defect and have been classified as frost resistant.

INSTRUCTIONS
Reference should be made to the Safety Data Sheet.
S-2300 E is mixed in equal parts by weight.

The two parts must be mixed very thoroughly together until the colour and texture is even. The surfaces to be bonded should be free from dust and grease and, preferably, dry. The mixed adhesive is trowelled onto one face, the other face is offered up and the two pieces are kept in position until cure is substantially complete, generally overnight.