Products

Brick finishing Products

S-344E

 

 

S-344E is a two part epoxy capable of curing at ambient and reduced temperatures. S-344E is solvent free.

APPLICATIONS
S-344 E is offered in three colours, black, white and yellow, to be painted on to paviors. Black and white are intended for the chevrons on roundabouts, the white paint can be sprinkled with Ballotini (solid glass microspheres) whilst still uncured, to give a reflective surface. The yellow paint is intended for street marking and parking bays.


INSTRUCTIONS
Reference should be made to the Material Safety Data Sheet for each colour to be used. Ensure that the surface is free from dust and grease, and is dry.  Pour the contents of the Part 2 jar into Part 1 and stir thoroughly. The packs contain the exact amount to cure each other. Paint the paviors without delay, a single coat should suffice to give adequate coverage.  If it is proposed to use Ballotini for a reflective surface then this should be sprinkled onto the wet surface.  Alternatively one may 'kiss' the upturned pavior into a bed of the microspheres.

S-2710E

 

S-2710E is a two part epoxy adhesive designed to reface bricks. The adhesive is applied in a thin layer and then sand is applied to give an authentic brick finish. S-2710E can be applied on wet brick and can also be used in cut and bond applications.

S-2432E

 

S-2432 E is a two-part epoxy putty curing at ambient temperature designed for brick and concrete repair.


APPLICATION
S-2432 E has a suitable consistency to work into brickwork and embed it.  It cures quite quickly to give a tough patch.


INSTRUCTIONS
Reference should be made to the Material Safety Data Sheet before use.
Ensure that the brickwork or other substrate is clean, dry and free from dust. Mix S–2432 E by hand thoroughly in the ratio Part 1: Part 2 = 1:1 by weight kneading it until thoroughly mixed.  Do not mix more than can be used within the work-life.  Apply to the brickwork working into the area to be repaired

 

S-2630E

 

S-2630 E is a two part water-borne epoxy paint available in a range of colours.  It cures to a matt film.

 


APPLICATIONS
S-2630 E may be used to change the colour of bricks or their texture if sand is incorporated.


INSTRUCTIONS
Reference to the Material Safety Data Sheet before use.  Mix both Part 1 and Part 2 thoroughly before mixing together.Ensure that the surface is clean, it may, of course be wet.  If a dry porous surface is to be coated then slightly damp it with water spray before applying the paint.

Mix the components in the ratio Part 1: Part 2 = 1:5 by weight.  If required grit or sand may be added at this point or sprinkled on the surface, possibly with another coat on top, depending on the effect it is desired to create.

S-2364E

 


S–2364 E is a two-part, free-flowing, cold curing epoxy paste designed to fill the perforations in bricks.  S-2364 E combines a long pot-life with a rapid cure enabling bonds to be handled next day.  S-2364 E is offered in its natural colour and in pigmented master colours - red, buff and blue - for the user to tint as required.


APPLICATION
S–2364 E is primarily designed to fill the holes in perforated bricks prior to cutting for plinths etc.

 

INSTRUCTIONS
Reference should be made to the Material Safety Data Sheet.  S–2364 E is mixed in equal parts by weight.  The dust free brick is placed on a flat piece of release paper.  The paste is then poured into the hole and the brick left undisturbed for a minimum of 4 hours or until the paste has hardened.