Products

S-2690E

DESCRIPTION
S-2690E is a two-part cold curing epoxy compound, which is mixed with sand to form a pointing mortar for brick slip panels.

INSTRUCTIONS
References should be made to Material Safety Data Sheet.  The surfaces should be dust free but need not be dry.  Any metal reinforcement should be free of loose corrosion. 

Panels/units need to be placed horizontally.  Mix sufficient material to point the whole surface.  Mix the resin and hardener in the correct ratio.  The compound is then mixed with dry sand at a ratio 25 parts sand to 1 part compound by weight (the sand can be coloured with pigment powder to achieve various coloured mortars).  The pointing mortar is tipped onto the surface then brushed into the joints with a stiff brush.  After 30 minutes curing the mortar is then smoothed using an appropriate pointing tool and the loose material brushed away from the surface.