Structural Adhesives Limited

S-2184 E may be used to bond finials to ridge tiles.

S-2184 E can be supplied to match given colours of tiles.

S-2184 E is suitable for fixing facing brick slips to internal and external elevations.

INSTRUCTIONS
Refer to the Material Safety Data Sheet.
Ensure the surfaces to be bonded are clean, dry and free from grease and dust. 

Mix S-2184 E very thoroughly in equal parts by weight.   Do not mix more than can be used within approximately 10 minutes.
Apply mixed adhesive to one surface and offer up the second surface whilst the adhesive is still pasty.  Leave the bond undisturbed for at least 15 minutes, longer for small bond areas. The assembly must be kept in position until the cure is substantially complete.  At this time the adhesive is not fully cured but the assembly may be gently moved aside to complete the cure. 
In the case of brick slips the mixed adhesive is applied to one surface with a serrated trowel.
The adhesive is cured after leaving overnight but at temperatures of 5C. and below, final curing period may be prolonged.